Welding shop - http://shop.aroundtheweld.com

Used Hobart Welders - Used




   Used Hobart Welders - 107 items found  View more items

Used Hobart Welders - Bookshelf


290 pages

Popular Mechanics

1951-12

All you need is a Hobart "Simplified" Welder and average mechanical ability. You 'll soon be swamped with work. Hobart Welders are used in leading production plants everywhere — give you 1 ,000 combinations of heat, let you make fine ...

About this book
Popular Mechanics inspires, instructs and influences readers to help them master the modern world. Whether it’s practical DIY home-improvement tips, gadgets and digital technology, information on the newest cars or the latest breakthroughs in science -- PM is the ultimate guide to our high-tech lifestyle.



296 pages

Popular Science

1952-10

(full size) ARC W£LD£R HOBART ARC WELDERS ARE SIMPLIFIED Be independent! Set up your Own welding shop and start earning big money. With a Hobart "Simplified" Welder, that is easy to use — a welder that will let you go out after the big ...

About this book
Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.



308 pages

Popular Mechanics

1949-12

YOU CAN DRILL SQUARE HOLES The Budget Square Hole Drill is a simple, economical, nationally used precision tool ... time ... on shop or field work . . . you make more money with HOBART Arc Welders. Mail coupon below and find out why.

About this book
Popular Mechanics inspires, instructs and influences readers to help them master the modern world. Whether it’s practical DIY home-improvement tips, gadgets and digital technology, information on the newest cars or the latest breakthroughs in science -- PM is the ultimate guide to our high-tech lifestyle.


Used Welders Directory

Hobart Welders
Hobart's full line of industrial quality Wire Feed Welders, STICK Welders, TIG Welders, Engine Driven Welders, and Plasma Cutters, are a great choice for your ...

used hobart welders | eBay - Electronics, Cars, Fashion ...
Find great deals on eBay for used hobart welders used welders. Shop with confidence.

Hobart Welders For Sale | Used Hobart Welders | Cheap ...
Hobart Welders. Welcome to the Hobart Welders Page. Here you will find a great selection of Hobart welders for sale.

Hobart Welders - e-Learning - Welding Glossary
Knowledgeble welding distributors who can help you select the right Hobart equipment.

Hobart Welding Products
APPLETON, Wis., July 23, 2012 — Hobart Welding Products has introduced a new AC/DC stick welder that provides up to 300 amps of weld power, proving to users that ...


ADVANCED PRODUCT FINDER

    Don't see what you're looking for?

Editor's picks

  • Hobart

    Hobart 500559 Handler Wire Welder

    Home Improvement (Hobart)

    Rating (81 reviews):
    (4.9/5)
    Hobart

    If you need a small welder.., this is it !!

    0 5/5 Allen - See all my reviews Verified Purchase(What's this?) This review is from: Hobart 500559 Handler Wire Welder (Misc.) Just recently bought this welder to do an auto project I have. I have searched for over 4 months to find the best one for the buck and since I work at a auto shop, and they use this to do exhaust work, it was the obvious choice to make. It took a couple of days to get it set up correctly. I am extremely new at welding. After setting it up and trying it out, I will say this welder welds like a champ. Heck, it even made me look like a pro. I would say read the directions..carefully !!. There is alot of tips and must-need-to-know info in them. And for the price that was offered here, you can't beat it. If you want a 110v welder.., don't even hesitate. BUY THIS WELDER !!! 0 Help other customers find the most helpful reviews  Was this review helpful to you? , March 5, 2013

    Nice Welder

    0 5/5 go-dwr - See all my reviews Verified Purchase(What's this?) This review is from: Hobart 500559 Handler Wire Welder (Misc.) Hobart makes a good welder is why I choose this unit. It is only 110 volt but is fine for the smaller projects that I do. This model 500559 Handler 140 is the upgrade to the Handler 140 model 500500 which gives you a bigger opening ground clamp and a metal gear on the drive motor. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , January 30, 2013

    Best bang for the buck

    0 5/5 BMXER "maxmetal" (nc usa) - See all my reviews Verified Purchase(What's this?) This review is from: Hobart 500559 Handler Wire Welder (Misc.) I have owned many welding machines 110 units and larger. For the dollar this is a great welder! No plastic ,only hot when you pull the trigger and a pretty consistent weld. I had the same size unit except Miller and it cost $300 dollars more. I would purchase this machine again. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , June 20, 2013
    List Price: $599.99
    Price: $529.00
    You Save: $70.99 (12%)
    Industrial cast aluminum drive system
    25 - 140 amps
    Operates off 115 volt household current
    Welds 24 gauge to 1/4 inch mild steel
    Designed and assembled in Troy, OH USA


  • Hobart

    Hobart 500536 Ironman 230 250 Amp MIG Welder With Wheel Kit & Cylinder Rack

    Home Improvement (Hobart)
    List Price: $1,904.39
    Price: $1,499.99
    You Save: $404.40 (21%)

    The IronMan 230 is a total redesign of the full-size MIG platform, outperforming the competition on arc quality, voltage control, duty cycle and value
    The arc of the new IronMan 230 is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.
    It delivers 30-250 amps of pure power in a heavy duty cabinet.


  • Hobart

    Hobart 500549 Auto Arc 130 Wire Feed MIG Welder

    Home Improvement (Hobart)
    List Price: $549.95

    115 volts, 130 amps
    Welds with gas and without gas
    Makes strong reliable welds
    Plugs into a household outlet
    Welder comes with sample spool of Flux core wire and 3 replacement contact tips


  • Hobart

    Hobart 500554 Handler 190 Wire Feed Welder

    Home Improvement (Hobart)
    List Price: $799.95
    Price: $699.99
    You Save: $99.96 (12%)

    Operates on 230V input power and offers an output range of 25 to 190 amps.
    Features a 7-position voltage switch.


  • Hobart

    Hobart Handler 500554001 190 with SpoolRunner 100

    Home Improvement (Hobart)

    Rating (32 reviews):
    (4.8/5)
    Hobart

    Incredible Welder

    0 5/5 J. Sweet (Atlanta, GA) - See all my reviews, May 17, 2012

    Great welder.

    0 5/5 canoer79 (Mid-MO) - See all my reviews Verified Purchase(What's this?) This review is from: Hobart Handler 500554001 190 with SpoolRunner 100 (Tools & Home Improvement) Would recommend this to any home professional or a small shop. Good wire feed consistency the regulator works great and it has plenty of power. I've welded 1/2 a36 with full penetration. The spool runner is also great, remember you will need a different shielding gas for aluminum than for steel. Only complaint is the ground clamp was a little cheap. Easily replaced for about 30 dollars. though. 0, December 1, 2012

    Hobart Handler 190+ isBest Value In the Market

    I bought this Hobart 190 Handler with Spool Runner 100 to ugrade from my small 130Amp mig welder of a different prominent blue colored brand of welder. The difference was night and day!I started out on an aluminum MIG welding project. I had never done Aluminum before and I found the spoolrunner very easy to use for even a beginner, and the performance and weld quality was good after I wrked with it for awhile. The suggested settings on the machine for all materials are "close". I also found the spoolrunner a very well designed and high quality piece, but read the instructions!!! Seriously.The best part (even better than the spool gun) is the steel welding capability.This is the night and day part. The very first steel bead I layed with this machine was the best weld bead I had ever put down in my life. The suggested settings were PERFECT. The wirefeed stability is PERFECT. The arc stability I found to be nearly as good as your average Lincoln, which is... 5/5 Joe Wirkus - See all my reviews Verified Purchase(What's this?) This review is from: Hobart Handler 500554001 190 with SpoolRunner 100 (Tools & Home Improvement) I bought this Hobart 190 Handler with Spool Runner 100 to ugrade from my small 130Amp mig welder of a different prominent blue colored brand of welder. The difference was night and day!I started out on an aluminum MIG welding project. I had never done Aluminum before and I found the spoolrunner very easy to use for even a beginner, and the performance and weld quality was good after I wrked with it for awhile. The suggested settings on the machine for all materials are "close". I also found the spoolrunner a very well designed and high quality piece, but read the instructions!!! Seriously.The best part (even better than the spool gun) is the steel welding capability.This is the night and day part. The very first steel bead I layed with this machine was the best weld bead I had ever put down in my life. The suggested settings were PERFECT. The wirefeed stability is PERFECT. The arc stability I found to be nearly as good as your average Lincoln, which is... Read more Help other customers find the most helpful reviews  Was this review helpful to you? , June 14, 2013
    List Price: $899.00
    Price: $848.99
    You Save: $50.01 (6%)
    Built-in gas solenoid valve and dual-gauge regulator with gas hose
    10-ft. (3 m) power cord
    Spool hub assembly accommodates 4 or 8 in. spools
    Comfortable 10-ft. (3 m) H100S4-10 gun10-ft. (3 m) work cable with clamp
    SpoolRunner 100 10ft (3m) cable and plastic case


  • Hobart

    Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor

    Home Improvement (Hobart)
    List Price: $1,099.00
    Price: $819.99
    You Save: $279.01 (25%)

    10-by-7-1/2-by-13-inches at 27-pounds; backed by Hobart limited warranty
    Includes 16.5-foot heavy duty work clamp, 7 -foot power cord with 115 VAC plug, extra replacement tips, and a convenient cable management strap
    Use it for a more precise cut, thinner kerf, and less slag to clean up with faster cuts than oxy fuel
    Designed to cut up to 1/4-inch mild steel; uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals
    Hobart AirForce 250ci lightweight plasma cutter with air compressor, powered by standard household current


  • Hobart

    Hobart 500553 Handler 210 MVP For Use with SpoolRunner 100

    Home Improvement (Hobart)

    Rating (29 reviews):
    (4.7/5)
    Hobart

    Superb Little Wire-feed Welder

    I've been welding/fabricating for over thirty years. I've always had Lincoln welders in my shop. Industrial grade, 100 percent duty cycle, an Idealarc SP-200 mig welder and an Idealarc 300 tig welder. I also had a small 115 volt Lincoln mig welder that I bought at Home Depot years ago, a WeldPak 3200. I ran .035 flux-core through it and it worked fine with that. When I was forced to leave my shop some years ago when the property owner sadly passed away I sold all my large equipment and dragged what remained home to my garage. The little Lincoln 3200 I kept. Recently I landed some fabricating work that demanded changing my set-up to hard-wire and shielding gas. So I bought a bottle of 75/25 Argon/CO2 mix, changed the polarity, etc. and finished the job. But I never could get that little Lincoln to run as nice as my old industrial machines. I wasn't welding really thick material, just .095 and .120 tubing, and similar flatbar.Anyway....the job's done, I get paid, and I'm... 5/5 D. Mercer (SANTA ROSA, CALIFORNIA, US) - See all my reviews Verified Purchase(What's this?) This review is from: Hobart 500553 Handler 210 MVP For Use with SpoolRunner 100 (Tools & Home Improvement) I've been welding/fabricating for over thirty years. I've always had Lincoln welders in my shop. Industrial grade, 100 percent duty cycle, an Idealarc SP-200 mig welder and an Idealarc 300 tig welder. I also had a small 115 volt Lincoln mig welder that I bought at Home Depot years ago, a WeldPak 3200. I ran .035 flux-core through it and it worked fine with that. When I was forced to leave my shop some years ago when the property owner sadly passed away I sold all my large equipment and dragged what remained home to my garage. The little Lincoln 3200 I kept. Recently I landed some fabricating work that demanded changing my set-up to hard-wire and shielding gas. So I bought a bottle of 75/25 Argon/CO2 mix, changed the polarity, etc. and finished the job. But I never could get that little Lincoln to run as nice as my old industrial machines. I wasn't welding really thick material, just .095 and .120 tubing, and similar flatbar.Anyway....the job's done, I get paid, and I'm... Read more Help other customers find the most helpful reviews  Was this review helpful to you? , September 5, 2012

    Great out of box experience

    I usually TIG weld aluminum, but I wanted to weld thicker/larger pieces faster. To MIG weld aluminum requires spray transfer, and 200 amps is about the bottom end for thicker pieces. The Hobart 210 MVP with the addition of the SpoolRunner 100 spool gun welds 1/4 inch aluminum like lightning! I can weld in a 1/4 of the time of TIG. No stack of dimes look, but nice smooth fully penetrated welds.The MVP 110/220v feature makes this a good light duty flux-core field welder also (although it does weigh 75 lbs, so I wouldn't want to hand-carry it daily). For occational field welding, I throw it in the truck and go! (140 amps at 110v, 210 amps at 220v).Now I can use my TIG for what it's best at, heat control on thin material.I also contemplated buying the Miller 211 MVP with Autoset. I tried the Autoset feature at the local college on two seperate Miller 210's, and was unimpressed. Ended up just simply setting the volts and wire-speed manually. The Miller... 5/5 Scott (Technogeek) (Coastal Southern California) - See all my reviews, August 26, 2012

    Great for a newbie/harry homeowner

    A couple of years ago, I decided to learn to weld ... it was just something I've always wanted to learn.I started with Stick (SMAW), because of the low cost to get started.Spent about a year and a half learning ... am now pretty decent at it.I'd been told that MIG is much easier, and I knew that to weld Aluminum, or thinner stock, it was the way to go.I wanted to buy one welder that would be capable of anything that I might want to do now, or in the future.I chose this welder because of the choice in input voltage (convenient, since I can use it anywhere), the fact that it is set up to accept an affordable spool gun, and the heat range: on the low side, it'll weld pretty thin material, on the high side, it'll weld anything I might reasonable expect to tackle.I'm sure that this machine is an excellent one for the experienced/professional welder. I'll let the other reviewers tell you that that is the case, as I am not remotely qualified... 5/5 David Carswell (DC Metro Area) - See all my reviews, October 28, 2013
    List Price: $925.00
    Built-in gas solenoid valve and dual-gauge regulator
    Spool hub assembly accommodates 4 or 8-Inch spools
    Comfortable 10-Feet (3-meter) H100S4-10 gun 10-Feet (3-meter) work cable with clamp


  • Hobart

    Hobart 500550 Auto Arc 130 Wire Feed MIG Welding Kit

    Home Improvement (Hobart)

    Fixed flow MIG regulator and hose assembly
    Comes with with helmet, regulator, and cart
    Solid welder for home use
    Operates off 115-volt household current
    7-Foot work lead, 6-Foot power cord


  • Hobart

    Hobart 500551 EZ TIG 165i 230-Volt Inverter-Based AC/DC Welder

    Home Improvement (Hobart)
    List Price: $1,650.00
    Price: $1,439.99
    You Save: $210.01 (13%)

    Offers a unique single knob control
    It has superior weld performance
    Easiest AC/DC TIG welder to set up and use


  • Hobart

    Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch

    Home Improvement (Hobart)

    Rating (6 reviews):
    (4.8/5)
    Hobart

    Used in Millermatic 211 MVP

    0 5/5 BigWin (Las Cruces, NM) - See all my reviews Verified Purchase(What's this?) This review is from: Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch (Tools & Home Improvement) This is the proper Aluminum to use with the MM211. 5356 is not to be used with the MM211 as it has a higher current rating. This stuff burns great! It's clean and works wonderfully. I already added more to my cart. Do not hesitate to buy, it's a great price at $13.65 shipped with Prime! 0 Help other customers find the most helpful reviews  Was this review helpful to you? , October 8, 2012

    Good wire

    0 5/5 pk - See all my reviews Verified Purchase(What's this?) This review is from: Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch (Tools & Home Improvement) Wire works very well for 6061 aluminum applications. Lays down great beads of weld on boat fabrications I do here at my work. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , March 28, 2013

    Great aluminum wire

    0 5/5 Benjamin - See all my reviews Verified Purchase(What's this?) This review is from: Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch (Tools & Home Improvement) Great aluminum welding wire for the spoolrunner 100. I use this wire with a hobart 190 and the spoolrunner 100 and have had good results 0 Help other customers find the most helpful reviews  Was this review helpful to you? , March 5, 2014
    List Price: $28.95
    Price: $14.99
    You Save: $13.96 (48%)
    It can be used to weld various grades of aluminum.
    Its bright weld finish makes it a popular choice of welders.
    A general-purpose type aluminum welding wire.


Used Welders


Used Hobart Welders - News


Lorance was born and raised in Hobart, a small town in Oklahoma, the son of a welder and a stay-at-home mom. As a toddler, his mother said, he played with toy guns and firetrucks. “We knew at a young age who he was going to be: someone who would ...
Washington Post - Aug 02, 2013

He was driving a Hazell Brother's 2007 Hino FG field service truck at the time and was on his way from Hobart up to Oatlands where the company is laying pipes for the Midlands Irrigation Scheme. Tim tells us he has been with the outfit for 2½ years ...
Big Rigs - Aug 04, 2013

Car nuts go the extra mile Phil himself is no car nut, but as a former boiler maker and welder he appreciates engines as a whole which, he says, helps keep him unbiased when deciding on car collections. "I used to be passionate about Australian muscle cars, but the last few cars ...
Weekly Times Now - Jul 16, 2013

Go-Kart reported among stolen items plastic seats with a 250 cc motor. They also took a black tool chest with red drawers full of misc. hand tools, and a Hobart Mig Welder. Anyone with information please contact 269-467-9045 Ext 316 with any information. Go-Kart reported among stolen ...
WWMT-TV - Jul 15, 2013

Solutions from ITW Welding companies' Hobart Brothers, Bernard and Tregaskiss will also be demonstrated with premium Miller equipment in order to highlight the benefits of comprehensive welding solutions. It also features controls that are labeled ...
MFRTech (press release) - Jul 19, 2013


Certificates